1" - Steel lapel pin silkscreened with epoxy and clutch. Silk screen is the perfect alternative when the enamel fill process is not compatible with the pin design. Each color ink is squeezed through a silk mesh directly onto the metal background. An epoxy dome is applied to insure a durable, glossy finish and protects the logo.

1/2" - Brass lapel pin with photo etched enamel with clutch. The design is etched with acid into the brass metal which allows for very fine details. Thinner metal, hand filled with brilliant enamel and baked to harden. Silk screen colors may be added to enhance small details or letters.

2.25" x 1.25" - Die-struck steel key tag with sandblasting and 25mm to 30mm split ring. The recessed areas have a sandblasted finish which makes the product look valuable, and of course at an economical price.

1" - Brass lapel pin with photo etched enamel with clutch. The design is etched with acid into the brass metal which allows for very fine details. Thinner metal, hand filled with brilliant enamel and baked to harden. Silk screen colors may be added to enhance small details or letters.

1.5" x 1.5" - Steel key tag with sticker and 25mm to 30mm split ring. Sophisticated multi-colored process allows for very close duplication of your original picture. Your logo is reproduced, die-cut, and applied to the pin. An epoxy dome is applied to insure a durable glossy finish and protects the logo.

1" - Plastic blinking lapel pin with die-cut sticker and clutch. Thickness is 1.2mm. Advertise your logo with these blinking LED light lapel pin.

2.25" x 1.25" - Soft enamel steel key tag with epoxy and 25mm to 30mm split ring. Steel is hand filled with soft enamel colors and then backed to a hard finish.

1 1/2" - Steel lapel pin silkscreened with epoxy and clutch. Silk screen is the perfect alternative when the enamel fill process is not compatible with the pin design. Each color ink is squeezed through a silk mesh directly onto the metal background. An epoxy dome is applied to insure a durable, glossy finish and protects the logo.

1/2" - Plastic blinking lapel pin with die-cut sticker and clutch. Thickness is 1.2mm. Advertise your logo with these blinking LED light lapel pin.

2.25" x 1.25" - Brass key tag with photo etched enamel and 25mm to 30mm split ring. Has a thickness of 1.2mm. The design is etched with acid into the brass metal which allows for very fine details. Thinner metal, hand filled with brilliant enamel and baked to harden. Silk screen colors may be added to enhance small details or letters.

1" x 1.5" - Steel key tag with sticker and 25mm to 30mm split ring. Sophisticated multi-colored process allows for very close duplication of your original picture. Your logo is reproduced, die-cut, and applied to the pin. An epoxy dome is applied to insure a durable glossy finish and protects the logo.

1.5" x 1.5" - Brass key tag with photo etched enamel and 25mm to 30mm split ring. Has a thickness of 1.2mm. The design is etched with acid into the brass metal which allows for very fine details. Thinner metal, hand filled with brilliant enamel and baked to harden. Silk screen colors may be added to enhance small details or letters.

2.25" x 1.25" - Steel key tag silkscreened with epoxy and 25mm to 30mm split ring. Silk screen is the perfect alternative when the enamel fill process is not compatible with the key tag design. Each color ink is squeezed through a silk mesh directly onto the metal background. An epoxy dome is applied to insure a durable, glossy finish and protects the logo.

1 1/2" - Plastic blinking lapel pin with die-cut sticker and clutch. Thickness is 1.2mm. Advertise your logo with these blinking LED light lapel pin.

1 1/2" - Brass lapel pin with photo etched enamel with clutch. The design is etched with acid into the brass metal which allows for very fine details. Thinner metal, hand filled with brilliant enamel and baked to harden. Silk screen colors may be added to enhance small details or letters.

2.25" x 1.25" - Steel key tag with sticker and 25mm to 30mm split ring. Sophisticated multi-colored process allows for very close duplication of your original picture. Your logo is reproduced, die-cut, and applied to the pin. An epoxy dome is applied to insure a durable glossy finish and protects the logo.

1" x 1.5" - Brass key tag with photo etched enamel and 25mm to 30mm split ring. Has a thickness of 1.2mm. The design is etched with acid into the brass metal which allows for very fine details. Thinner metal, hand filled with brilliant enamel and baked to harden. Silk screen colors may be added to enhance small details or letters.

1" x 1.5" - Die-struck steel key tag with sandblasting and 25mm to 30mm split ring. The recessed areas have a sandblasted finish which makes the product look valuable, and of course at an economical price.

1.5" x 1.5" - Die-struck steel key tag with sandblasting and 25mm to 30mm split ring. The recessed areas have a sandblasted finish which makes the product look valuable, and of course at an economical price.